Details

OPM 4-4D Optical Power Meter

The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification.

Rent NOYES SLP 4-6D OPM 4-4D OLS 2D Fiber Test Kit

The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

Rent SLP 4-6D OPM 4-4D OLS 2D

Features:

Rugged, handheld, lightweight
Multimode or single-mode applications
Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
Wave ID automatic wavelength identification and switching
Passive Optical Networks (PON) testing
Dual Wavelength testing
270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
Large LCD with Backlight
Power measurements in dBm or µW; insertion loss in dB
Reference power level storage
AA alkaline, optional rechargeable NiMH battery pack
Battery Gauge
N.I.S.T traceable

Rent AFL NOYES SLP 4-6D OPM 4-4D OLS 2D

Lease NOYES SLP 4-6D OPM 4-4D OLS 2D Fiber Test Kit Rental

404